Platinum Samandy specializes in the supply of cold rolled and hot rolled sheet piles and tubular steel piles. We provide complete piling solutions, from general advice to full engineering support and design, including accessory packages and value add services such as painting, hot formed clutches, tie rods, and combination piling systems.
A piling solution is a package that includes all elements essential to provide the client with a complete solution to their piling requirements, rather than just supplying a product.
Our piling products are manufactured to international standards by our pre-qualified manufacturers. All sheet piles supplied by Platinum Samandy are fully traceable back to raw materials and are fully certified. Material test certificates in accordance with EN 10204 3.1 or 3.2 are routinely supplied with all sheet piles.
Hot Rolled Sheet Piles
Sheet piles, also known as U-type sheet piles or Larssen Sheet Piles are widely used in construction. They can be used in permanent or temporary applications. Platinum Samandy has a wide range of hot rolled sheet pile shapes and sizes that can be engineered to each client’s specific application.
Hot rolled sheet piles are produced to EN 10248, JIS A5523 and JIS A5528 standards.
| Type | Z Sheets, U Sheets, Hat Sheets, Straight Web Sheets |
| Pile Specification | EN 10248, JIS 5523 and JIS 5528 |
| MATERIAL SPECIFICATION | GRADES |
|---|---|
| EN 10025 | S235, S275, S355, S390, S420, S460 |
| JIS A5523 | SYW295, SYW390 |
| JIS A5528 | SY295, SY390 |
| JIS G3101 | SS400, SS490, SS540 |
| ASTM A252 | Grade 1, 2, 3 |
| ASTM A572 | Grade 42, 50, 55, 60, 65 |
| AS 3678 | C350, C450 |
| CSA 40.21 | 260W, 300W, 350W, 400W |
| GB/T 700 | Q235B |
| GB/T 1591 | Q345B, Q345C, Q390B, Q420B |
| TOLERANCE | BS EN 10248 | |
|---|---|---|
| Mass | ± 5% | |
| Length | ± 200mm / ± 7.87402“ | |
| Height | ± 7mm / ± 0.275591 | |
| Thickness | ≤ 8.5mm / ≤ 0.334646“ ≤ 8.5mm / ≤ 0.334646“ | ± 0.5mm / ± 0.019685“ ± 6% |
| Width single | ± 2% | |
| Width of pair | ± 3% | |
| Straightness | ≤ 0.2% of the length | |
| Squareness of end | ± 2% of the width |
Hot Rolled Sheet Piles
Platinum Samandy sheet piles are produced in accordance with design code EN 1993-5:2007 and the manufacturing standard EN 10249 parts 1 &2. We comply with the structural steel welding requirements of AS/NZS 1554.1 2004.
Platinum Samandy has a wide range of cold rolled sheet pile shapes and sizes that can be engineered to each client’s specific application.
| Type | CRZ Sheets, CRU Sheets, CRW Sheets, BP Sheets, EU Sheets, Trench Sheets |
| PIle specification | EN 10249, JIS 5523 and JIS 5528 |
| MATERIAL SPECIFICATION | GRADES |
|---|---|
| EN 10025 | S235, S275, S355, S390, S420, S460 |
| JIS A5523 | SYW295, SYW390 |
| JIS A5528 | SY295, SY390 |
| ASTM A572 | Grade 42, 50, 60 |
| GB/T 1591 | Q235B, Q245B, Q345B, Q390B, Q420B |
| TOLERANCE | BS EN 10249 | |||
|---|---|---|---|---|
| Mass | ± 7% | |||
| Length | ± 50mm / ± 1.9685“ | |||
| Height | h≤200±4mm/±0.15748” | 200| 300 | 400 | |
| Thickness | 5mm/0.19685”=±0.29mm 8mm/0.31496”=±0.35mm 6mm/0.23622”=±0.31mm 9mm/0.35433”=±0.40mm | 10mm/0.39370”=±0.40mm 12mm/0.47244”=±0.43mm | 13mm/0.51181”=±0.46mm 15mm/0.59055”=±0.46mm |
|
| Width single | ± 2% | ± 2% | ± 2% | ± 2% |
| Width of pair | ± 3% | |||
| Straighness | Bending: ≤ 0.25% L Curving: ≤ 0.25% L Twisting: < 2% L but no more than 100mm | |||
| Straightness – Squareness | < 2% W | |||
Sheet Pile Accessories and Services
- Design Assistance
- Pile Shoes
- Corrosion Coating
- Tie Rods
- Hot Formed Clutch Systems
- Corner and Junction Piles
- Clutch Systems
- Engineered Cofferdams
- Fabricated Steel Bridge Span
Our engineering team has diverse qualifications and experience with civil, structural and geotechnical applications and work with state of the art analysis software and technical publications to meet relevant regional standards.
Tubular Steel Piles
We supply fully fabricated piles for marine structures as well as land based stabilization piles, king piles and combi-wall systems, foundation piles and a wide range of pile accessories.
| TYPE | SPECIFICATION | GRADES |
|---|---|---|
| Electric Resistance Weld (ERW) | API 5L | Grade B, X42, X52, X56, X60, X65, X70 |
| Electric Resistance Weld (ERW) | GB/T 1591 | Q345 |
| Electric Resistance Weld (ERW) | AS 1163 | C350-C450 |
| Spiral Weld (SSAW) | ASTM A252 | Grade 2, 3 |
| Spiral Weld (SSAW) | API 5L | Grade B, X42, X52, X56, X60, X65, X70 |
| Spiral Weld (SSAW) | GB/T 1591 | Q235, Q345 |
| Longitudinal Weld (LSAW) | ASTM A252 | Grade 2, 3 |
| Longitudinal Weld (LSAW) | API | Grade 2B |
| Longitudinal Weld (LSAW) | GB/T 1591 | Q235, Q345 |
| Longitudinal Weld (LSAW) | API 5L | Grade B, X42, X52, X56, X60, X65, X70 |
| Longitudinal Weld (LSAW) | AS 1579 | Grade 250, 300 |
| Seamless | EN 10225 | S355 |
| Seamless | ASTM A106 | Grade B |
| Seamless | API 5L | Grade B, X42, X52, X56, X60, X65, X70 |
Tubular Steel Pile Accessories
Material properties
- Pile Shoes
- Corrosion Coating
- Structural Tie Rods
- Stiffening Rings
- Shear Keys
- Lifting Lugs
- Hot Formed Clutches
- Pile Fabrication for Combi-walls
- Splicing and Fabrication to Full Engineered Length
- Logistics and project management capabilities
Supply condition
Structural steel materials are offered in many supply conditions:
Structural steel materials are offered in many supply conditions:
- As rolled
- Normalized
- Quenched and tempered (Q&T)
- Thermo-mechanically control processed (TMCP)
