Platinum Samandy carries a full range of carbon and alloy pipe, both for structural and process applications, in a variety of material offerings, as well as all complementary pipe components, fittings and flanges. We also offer a range of clad material, to meet bespoke requirements.
Structural Applications
We supply welded (SAW, ERW/HFI) and seamless tubular and hollow sections suitable for conductor pipe, riser pipe, tendon pipe, jacket members and other structural onshore and offshore applications.
Typical Stock Size Range* (size range might differ based on material grade):
Seamless pipe – 1 ½”- 24” (38.1mm – 609.6mm)
SAW – 20”- 42” (508mm – 1066.8mm)
ERW – 14” – 26” (355.6mm – 660.4mm)
Process Applications
We provide seamless and welded pipe for onshore, offshore, midstream, power and downstream applications, including line pipe, pipe for high temperature and pressure environments, abrasion resistant and HDPE pipe.
Typical Stock Size Range* (size range might differ based on material grade):
Seamless pipe – ¼”- 24” (13.7mm – 609mm)
Welded pipe – ¼” – 42” (13.7mm – 1066.8mm)
*Larger sizes and project specific dimensions manufactured to order.
Pressure Equipment Directive (PED) and NACE MRO 0103 and MRO 0175 as applicable.
Material Grades – Carbon Steel and Hollow Sections
Carbon Steel Pipe
SPECIFICATION | GRADES |
---|---|
EN 10225 | S355G15, S460G6 |
BS 7191 | 355EM |
API 5L | Grade B, X42, X52, X56, X60, X65, X70, X80, X100 |
ASTM A519 | SAE 4130, 4140 |
ASTM/ASME A/SA53 | Grade A, B |
ASTM A252 | Grade 2, 3 |
Hollow Sections
MATERIAL SPECIFICATION | GRADES |
---|---|
EN 10210 | S355J2H, S355NH |
EN 10219 | S355J2H |
AS/NZS 1163 | Grade C350L0, Grade 450L0 |
Material Grades – Line Pipe / API X Grades CSA High Yield Carbon Steel
MATERIAL SPECIFICATION | GRADES |
---|---|
API 5L | X52, X56, X60, X65, X70, X80 |
CSA Z245.1 | 359, 414, 448, 483 |
ASTM/ASME A/SA53 | Grade A, B |
ASTM/ASME A/SA106 | Grade B, C |
ASTM A252 | Class 2, 3 |
EN 10216-2 Seamless (Material No. (WNr) | P235GH (1.0345) P265GH (1.0425) |
EN 10217-5 Welded (Material No. (WNr) | P235GH (1.0345) P265GH (1.0425) |
Material Grades – Low and Moderate Temperature Carbon and Alloy Steel
MATERIAL SPECIFICATION | GRADES |
---|---|
ASTM/ASME A/SA333 | |
EN 10216-3 (Material No. (WNr) | P215NL (1.0451) P355N (1.0562) P355NH (1.0565) P355NL1 (1.0566) P275NL1 (1.0488) P275NL2 (1.1104) L290NB (1.0484) L360NB (1.0582) |
ASTM/ASME A/SA 671/672 | Grade 60, 65, 70 |
Material Grades – Chrome Moly (Cr-Mo) / P Grades (High Temperature)
MATERIAL SPECIFICATION | GRADES |
---|---|
ASTM/ASME A/SA 335 | P1, P5, P9, P11, P22, P91, P92 |
ASTM/ASME A/SA 691 | 1-1/4CR, 2-1/4CR, 5CR, 9CR, 91 |
EN 10216-2 Seamless (Material No. (WNr) | 16Mo3 (1.5415) 13CrMo4-5 (1.7335) 10CrMo9-10 (1.7380) 11CrMo9-11 (1.7383) X10CrMoVnb9-1 (1.4903) X10CrWMoVnb9-2 (1.4901) WB36 – 15NiCuMoNb5-6-4 (1.6368) 10CrMo5-5 (1.7338)14MoV6-3 (1.7715) |
EN 10217-5 Welded (Material No. (WNr) | 16Mo3 (1.5415) 13CrMo4-5 (1.7335) 10CrMo9-10 (1.7380) 11CrMo9-11 (1.7383) X10CrMoVnb9-1 (1.4903) X10CrWMoVnb9-2 (1.4901) WB36 – 15NiCuMoNb5-6-4 (1.6368) 10CrMo5-5 (1.7338)14MoV6-3 (1.7715) |
Russian standard grades such as 12H1MF, 15H1MF and 15H1M1F are also available. |
Material Grades – Stainless Steel
ASTM A312/358 TP | UNS | EN 10216-2 SEAMLESS / EN 10217-5 WELDED | MATERIAL NO. (WNR) |
---|---|---|---|
304 | S30400 | X5CrNi18-10 | 1.4301 |
304L | S30403 | X2CrNi19-11 | 1.4306 |
304H | S30409 | X6CrNi18-11 | 1.4948 |
310 | S31000 | X15CrNiSi25-21 | 1.4841 |
310S | S31008 | X8CrNi25-21 | 1.4845 |
316 | S31600 | X5CrNiMo17-12-2 | 1.4401 |
316L | S31603 | X2CrNiMo17-2-2 | 1.4404 |
316Ti | S31635 | X6CrNiMoTi17-12-2 | 1.4571 |
321 | S32100 | X6CrNiTi18-10 | 1.4541 |
321H | S32109 | X8CrNiTi18-10 | 1.4878 |
347 | S34700 | X6CrNiNb18-10 | 1.4550 |
347H | S34709 | X8CrNiNb16-13 | 1.4961 |
6Mo | S31254 | X1CrNiMoCuN25-20-7 | 1.4529 |
904L | N08904 | X1NiCrMoCu25-20-5 | 1.4539 |
Material Grades – Duplex and Super Duplex
ASTM A790/928 UNS | EN 10216-2 SEAMLESS / EN 10217-5 WELDED | MATERIAL NO. (WNR) |
---|---|---|
S31260 | X2CrNiMoN25-7-4 | 1.4410 |
S32900 | X3CrNiMoN27-5-2 | 1.4460 |
S31803 / S32205 | X2CrNiMoN22-5-3 | 1.4462 |
S32760 | X2CrNiMoCuWN25-7-4 | 1.4501 |
S32750 / S32550 | X2CrNiMoCuN25-6-3 | 1.4507 |
Material Grades – Nickel Alloy
ALLOY | DIN | UNS | ASTM SEAMLESS | ASTM WELDED | MATERIAL NO. (WNR) |
---|---|---|---|---|---|
20 | N08020 | B729 | B464 | 2.4660 | |
200 | N02200 | B161 | B622 | 2.4060/2.4066 | |
201 | N02201 | B161 | B622 | 2.4061/2.4068 | |
400 | N04400 | B165 | B725 | 2.4360 | |
600 | N06600 | B167 | B517 | 2.4816 | |
625 | N06625 | B444 | B705 | 2.4856 | |
800H/HT | N08811 | B407 | B514 | 1.4959 | |
825 | N08825 | B423 | N/A | 2.4858 | |
C276 | N10276 | B622 | B619 | 2.4819 | |
NiMo29Cr | N10675 | B619 | B619 | 2.4600 | |
NiCr21Mo14W | N06022 | B622 | B619 | 2.4602 | |
NiMo16Cr16Ti | N06455 | B622 | B619 | 2.4610 | |
NiMo16Cr15W | N10276 | B622 | B619 | 2.4819 | |
NiCr23Mo16Cu | N06200 | B622 | B619 | 2.4675 | |
NiCr30FeMo | N06030 | B622 | B619 | 2.4603 | |
NiCr33Mo8 | N06035 | B622 | B619 | 2.4643 | |
NiMo22Cr15 | N10362 | B622 | B619 | 2.4708 |
Material Grades – Copper Nickel
MATERIAL SPECIFICATION | GRADES |
---|---|
DIN 86019 | CuNi 90/10, CuNi 90/12, CuNi 70/30 |
Material Grades – Titanium
MATERIAL SPECIFICATION | GRADES |
---|---|
DIN 17861 Seamless | Ti Gr.2, Ti Gr.7 |
DIN 17866 Welded |
Abrasion Resistant and Induction Hardened (IH) Pipe
HDPE Pipe - Coated Line Pipe
Our in-house specialist knowledge and experience in the manufacture, supply and delivery of API coated line pipe to the oil and gas, water and slurry pipeline markets, allows us to support you at every step of your project’s lifecycle. This includes planning, prequalification and audit, procurement, production surveillance, quality management, in addition to onshore and offshore logistics solutions. We manage all projects in accordance with the provisions of our ISO 9001:2008 accredited Quality Management Systems.
- ASTM D2513 gas pipe
- ASTM F714 industrial
- ASTM F3035 industrial
- C-901 water pipe
- AWWA C-906 water pipe
- FM underground firewater
- API 15LE oil patch pipe
- Slurry Pipe / Abrasive Resistant Minimum 230 Brinell Hardness
- Ultra 600 IH, 500IH and 400H
- Chrome carbide
- Twin wall IH pipe
TYPE | SPECIFICATION | GRADES | OD RANGE | ALL THICKNESS RANGE |
---|---|---|---|---|
Electric Resistance Weld (ERW) | API 5L | Grade B, X42, X46, X52, X56, X60, X65, X70 (PSL1 and PSL 2) | 60.3mm – 610mm | 4.8mm – 16mm |
Spiral Weld (SSAW) | API 5L | Grade B, X42, X46, X52, X56, X60, X65, X70 (PSL1 and PSL 2) | 06.4mm – 2997mm | 6mm – 25mm |
Longitudinal Weld (LSAW) | API 5L | Grade B, X42, X46, X52, X56, X60, X65, X70, X80 (PSL1 and PSL 2) | 406.4mm – 1620mm | 6mm – 50mm |
Seamless | ASTM A106 | Grade B | 60.3mm – 660mm | 8.2Mmm – 50.8mm |
Seamless | ASTM A53 | Grade A, B | 60.3mm – 660mm | 8.2Mmm – 50.8mm |
Seamless | API 5 | Grade B, X42, X46, X52, X56, X60, X65, X70 | 60.3mm – 660mm | 8.2Mmm – 50.8mm |
COATINGS | LAYERS | CHARACTERISTICS | SPECIFICATIONS |
---|---|---|---|
Fusion Bonded Epoxy (FBE) | Single Layer FBE |
| CSA Z245.20 AS 3862.2002 |
Dual Layer Fusion Bonded Epoxy (DFBE) | 2 Layers FBE |
| CSA Z245.20 |
Three Layer Polyethylene (3LPE) | 1st – FBE 2nd – Copolymer Adhesive 3rd – Polyethylene |
| CSA Z245.21 DIN 30670 AS 1518 |
Three Layer Polypropylene (3LPP) | 1st – FBE 2nd – Copolymer Adhesive 3rd – Polypropylene |
| CSA Z245.21 DIN 30670 DIN 30678 |
Concrete Weight Coating (CWC) | 1st – Anti-corrosion Coating 2nd – Reinforced Concrete 3rd – Outer Wrap |
| ISO 21809-5:2010 |
Material Properties for Pipe and Tube
Supply Condition
Our structural and process materials are offered in many supply conditions, including:
- PSL1, PSL2
- Seamless hot and cold finished
- Rolled and welded, including from HIC plate
- Annealed
- Normalized
- Quenched and tempered (Q&T)
- Thermo-mechanically control rolled and welded (TMCP)
Supplementary Requirements
Simulated post weld heat treated (PWHT) testing
- Client specific non-destructive examinations
- Client specific destructive examinations
- Non-standard tolerances
- Specific restriction in resitutinal elements
Certification: EN 10204 3.1 and 3.2 – Lloyds, GL, ABS, DNV, BV